SMC ZK2C07K5NC1-06
$150.00
| Ultimate Vacuum (kPa) | -91 |
| Vacuum Port Connecting Port Shape | One-Touch Coupling |
| Air Supply Port Connecting Port Shape | – |
| Application | Manifolds |
| Operating Temp. Range(°C) | -5～50 |
| Nozzle Dia. | 0.7mm |
| Exhaust Port | – |
| Rated Voltage | 24 V DC |
| Light / Surge Voltage Suppressor | Yes |
| Vacuum Pressure Sensor | No |
| Unit Specifications | – |
| Accessories | No |
| Vacuum Break Flow Adjusting Needle | No |
| Additional Function | Filter / Valves For Vacuum Generation / Reverse Check Valve (Vacuum Retention) / Vacuum Destructive Valve / Central Exhaust Specification |
| Air Consumption Flow Rate(l/min) | 24 |
| Vacuum Port One-Touch Fitting Size | Ø6 |
| Air Supply Port One-Touch Fitting Size | – |
| Operating Pressure Range(MPa) | 0.3～0.6 |
| Suction Flow(l/min) | 29 |
| Exhaust Specifications | Combined exhaust |
| Combination of Supply & Release Valves | Supply valve (N.C.) / release valve (N.C.) |
| Electrical Entry | Collective wiring specifications (plug-in) (dedicated for manifold) |
| Manual | Non-locking type |
| Output Specifications | Without a pressure switch/sensor |
| Lead Wire Specifications | Without lead wire with a connector |
| Vacuum Switch Electrical Entry | Without a pressure switch/sensor |
| Options | Manifold common release pressure supply specification / with exhaust interference prevention valve |
| Valve Assembly | – |
| Connector Assembly | Solenoid valve connector 3-wire (for double), 2-wire (for single). |
| One-Touch Fitting Assembly | Supply (PV) port standards are ø6 mm and ø1/4″. |
| Sound-Absorbing Material | 10 pieces per set. |
| Vacuum Port Adapter Assembly | With one-touch fitting and filter element (case material: polycarbonate). |
| Filter Element | Filtration degree: 30 μm, 10 pieces per set. |
| Check Valve | For replacement or additions to prevent manifold exhaust interference, 10 pieces per set. |
| Vacuum Pressure Switch Assembly | With 2 screws, 1 gasket. |
| Lead Wire with Connector | – |
| Pressure Sensor Assembly | With 2 screws, 1 gasket. |
| High Noise Reduction Silencer Case Assembly | With sound-absorbing material (part no.: ZK2-SE4-6-A). |
