Servo Motor | MPL-B320P-MK72AA | Allen Bradley
Bulletin MPL – Low-Inertia Brushless Servo Motors Product, 460 V, Frame Size 3 = 100 mm (3.94 in.), Stack Length 20 = 50.8 mm (2.0in.), 5000 RPM, Multi-turn High-resolution Encoder (absolute feedback). Keyless Shaft Extension, SpeedTEC DIN Connector, Right Angle, 180 Degrees Rotatable (Quick Connect), No Brake, IEC Metric, Free Mounting Holes (Type FF).
Brand: Allen Bradley
Model: MPL-B320P-MK72AA
Type: Bulletin MPL – Low-Inertia Brush-less Servo Motor
Introduction:
ALLEN BRADLEY MPL- B320P-MK72AA Bulletin MPL – Low-Inertia Brushless Servo Motors Product, 460 V, Frame Size 3 = 100 mm (3.94 in.), Stack Length 20 = 50.8 mm (2.0in.), 5000 RPM, Multi-turn High-resolution Encoder (absolute feedback). Keyless Shaft Extension, Speed TEC DIN Connector, Right Angle, 180 Degrees Rotatable (Quick Connect), No Brake, IEC Metric, Free Mounting Holes (Type FF).
Is a Servo motor rotary actuator that allows for precise control of angular position, velocity and acceleration. The low inertia is that the motor is relatively flat and the spindle inertia is small. When the motor is repeatedly operated with high frequency, the inertia is small and the heat is small. Therefore, low inertia motors are suitable for high frequency reciprocating motion use.
Have a compact design to reduce motor size while delivering significantly higher torque. These compact and highly-dynamic brushless servo motors are designed by Allen-Bradley to meet the demanding requirements of high-performance motion systems. Low inertia servo motors typically require less power to achieve the same level of performance compared to higher inertia motors. This energy efficiency translates to reduced power consumption, longer battery life, and lower operating costs in robotic systems.
Optional keyless shaft is available in a small number of frame sizes with a long lead time, For the MPL-A/B3xx, MPL-A/B4xx, MPL-A/B45xx, and MPL-A/B5xx motors, there are replacement kits for field installation as well as shaft seal kits available. Nitrile is used to make the shaft seals, and kits come with a lubricant to reduce wear. 20,000-hour L10 bearing fatigue life. This 20,000-hour lifetime does not take into account any application-specific life reductions brought on by bearing grease. Pollution brought caused by outside forces. Motor winding regulates the maximum operating speed.
| Specification | Detail |
| Enclosure | Keyed Shaft Extension |
| Frame Size | 3 = 100 mm (3.94 in.) |
| Voltage | 460 V |
| Brake Option | No Brake |
| Connectors | SpeedTEC DIN Connector, Right Angle, 180° Rotatable (Quick Connect) |
| Magnet Stack Length | 20 = 50.8 mm (2.0 in.) |
| Feedback: | Single-turn High-resolution Encoder |
| RPM | 5000 RPM |
