PLC | 2080-LC50-48QWB | Allen Bradley

Brand:  Allen Bradley

Model:  2080-LC50-48QWB

Type:    PLC

Introduction:

This machine features 20 output relays and 28 inputs at 24 volts DC or AC, for a total of 48 inputs and 6 HSC supports. It needs around 20.4 and 26.4 Volts of DC power to operate, consuming about 33 Watts of power (Class 2). The input channels of this controller run in the 110 volt AC voltage category, reaching a maximum of 132 volts AC (at 60 Hz). Its maximum voltage in the off-state is 20 Volts AC. Its maximum ON-state current at 132 Volts AC is 16 mA, while its maximum OFF-state current is 1.5 mA. The controller requires wire sizes of between 0.2 and 2.5 millimeters squared (or 24 to 12 AWG) for signal wiring, and can be either solid or stranded copper wire.

The compact, reasonably priced controllers of this controller series are perfect for small and micro automation needs. The mounting holes on this controller allow for both direct panel attachment and DIN rail mounting. There is only one serial interface combination port included in it. It also supports ASCII protocol, which is frequently used in manufacturing applications to integrate barcode-reading devices. There are forty-eight (48) input and output points available in it. The device features twenty-eight (28) discrete inputs and operates at a nominal voltage of 24 volts DC/24 volts AC. It features six (6) High-Speed Counter (HSC) input channels that handle switching frequencies of up to 10 kHz and twenty (20) relay outputs. This controller can process up to 10K program steps and has 20K bytes of data memory.

There can only be two (2) wires per port for its signal, power, and communication, and they must all be copper. The highest temperature that this unit can tolerate in the surrounding air is 65 degrees Celsius (149 degrees Fahrenheit). Keep this unit in a relative humidity range of 5 to 95% to prevent condensation, and avoid using the module at temperatures higher than 65 degrees Celsius or lower than -20 degrees Fahrenheit (149 and -4 degrees Fahrenheit). There could be certain components in this unit that are susceptible to electrostatic discharge, or ESD. It is impervious to 8 kV air discharges and contact discharges up to 4 kV. The 2080-LC50-48QWB can produce shocks up to 25 and vibrations up to 2 G at 10 to 500 Hertz.