PLC | 2080-LC30-48QBB | Allen Bradley

Brand:  Allen Bradley

Model:  2080-LC30-48QBB

Type:    PLC

Introduction:

The Allen-Bradley 2080-LC30-48QBB programmable controller has 48 input and output channels in total. There are 20 outputs and 28 inputs spread among the 48 input and output channels of the 2080-LC30-48QBB programmable controller. Its measurements are 3.15 x 9.06 x 3.54 inches, and it weighs around 1.6 pounds. A Micro830 series Logic Controller, has forty-eight (48) I/O in total, made up of twenty-eight (28) 24 Volt AC/DC inputs and twenty (20) 24 Volt Source outputs. Only copper conductors, either solid or stranded, having an insulation rating of up to 90 degrees Celsius, may be used in the wiring of this item. The torque of its terminal screw is approximately 0.6 Nm, or 4.4 pounds per inch.

An output circuit type of 24 Volts DC source for both standard and high-speed functions, while its input circuit is 12/24 Volts sink/source in a standard function and 24 Volts sink/source at high speed. With an Off state minimum voltage of 4 Volts AC at 50 to 60 Hertz and a maximum Off state current of 1.5 mA, this device uses around 18.2 Watts of electricity. Its highest voltage in an Off state is 5 Volts DC. The module’s nominal current is 8.5 mA at 24 volts DC, its maximum current is 12 mA at 30 volts DC, and its minimum current is 1.8 mA at 10 volts DC while it is in the “On” state. It also has a nominal voltage of 12/24 Volts AC at 50 or 60 Hertz while it is in the On state.