Digital Plug-in Module | 2080-0B4 | Allen Bradley

Brand:  Allen Bradley

Model:  2080-0B4

Type:    Digital Plug-in Module

Introduction:

The 2080-OB4 digital plug-in is a four-channel, 12-pin female terminal block output module from the Micro800 series. The 2080-OB4 has a mounting torque of 1.48 pounds per inch, or 0.2 N-m, and does not require an enclosure (enclosure rating Open-Type). The terminal base screw torque for this output module, which has four (4) yellow status indicators, should be between 1.95 and 2.21 pounds per inch, or 0.22 and 0.25 N-m. The device has three voltage ratings: 10 Volts DC for the lowest, 24 Volts DC for the nominal, and 30 Volts DC for the maximum. The power supply for the 2080-OB4 module ranges from 10.8 V DC to 30 V DC at maximum. At 10 Volts DC, its current in the On-state hovers about 5.0 mA.

For any wire type to meet the criteria of the module, it must measure between 16 and 24 AWG, or 1.3 and 0.2 millimeters squared. When in operation, this module’s temperature can vary from -4 to 149 degrees Fahrenheit (-20 to 65 degrees Celsius), and when it is shut off, it can vary from -40 to 185 degrees Fahrenheit (-40 to 85 degrees Fahrenheit). For the 2080-OB4 to operate safely, the ambient air temperature cannot be higher than 149 degrees Fahrenheit. Certifications for this module come from KC, CE, C-Tick, and c-UL-us. Signals from field devices (also between 12 and 24 Volts) are detected by the 2080-OB4 module.