Servo Motor | MSK040C-0600-NN-S1-UPO-NNN | Rexroth
$2,200.00
Rexroth MSK040C-0600-NN-S1-UPO-NNN is a part of the MSK Servo Motor Series. It features a continuous torque of 3.1 Nm and a continuous current of 4.7 A. It also displays a maximum torque of 8.1 Nm and a maximum current of 12.4 A and a winding inductive of 21,300 m H. The model is extremely adaptable, and you can use it for both single-axis and multi-axis applications.
Brand : Rexroth
Type : Servo Motor
Rexroth MSK040C-0600-NN-S1-UPO-NNN is a part of the MSK Servo Motor Series. It features a continuous torque of 3.1 Nm and a continuous current of 4.7 A. It also displays a maximum torque of 8.1 Nm and a maximum current of 12.4 A and a winding inductive of 21,300 m H. The model is extremely adaptable, and you can use it for both single-axis and multi-axis applications. The maximum current is 12.4A, however, at 100K it should only be 4.7A. Although the motor is not the quietest, its noise level is not too high and does not exceed 75dB[A].
Rexroth MSK040C-0600-NN-S1-UPO-NNN is distinguished by its adaptability, strength, accuracy, and dependability. MSK servos are suitable for a range of motion control applications because they offer high torque density in a small size. Even though these motors are adaptable, there is a particular motor type for the purpose. There are several different MSK motor kinds, thus you must swap out your current servo for a similar one.
The MSK040C falls within the highly protected IP65 category. It is an absolute encoder with several turns and 128 increments. The item has an eight-pound weight limit and total dimensions of 11.2 x 7 x 5.2 inches. The device cools as the heat gradually escapes into the air. The electrical socket connection can rotate 240 degrees. The absence of a retaining brake makes the motor ineffective.
The key for the output shaft is included. Operating the device in an environment between 0°C and 40°C will ensure optimal functioning. Additionally, testing took place up to 1,000 meters above sea level. If you exceed these boundaries, the motor’s performance may be impacted.
- Electrical Connection: Plug, rotatable 240 degrees
- Encoder: Optical encoder, single turn hiperface, with 128 increment
- Size: 40
Length: 185.5mm
Winding: 600 - Cooling Mode: Natural Convection
- Speed Max: 7500 Revolutions per minute
- Holding Brake: Without Holding Brake
