Description

Omron E2A-M12KS04-WP-B1-2M

Brand :                                                        Omron

Model No:                                    E2A-M12KS04-WP-B1-2M

Type :                                                  Proximity Sensor

Product Description:

E2A-M12KS04-WP-B1-2M Specific:

Guarantees a sensing range that is roughly 1.5–2 times greater than any typical OMRON sensor.

Complete selection of standard sizes (M8, M12, M18, andM30; barrels, both long and short)

Guarantees a sensing range of roughly 1.5 to 2.

several times greater than any typical OMRON sense.

Emergencies like work piece collisions may disposed of.

Complete selection of standard sizes (M8, M12, M18, and M30; barrels, both long and short)

Customization is made easier by modular construction.

Wiring:

High-tension Lines

To guard against damage or malfunction, run the proximity sensor’s cable through a separate metal conduit if a power or high-tension line is located close by.

Maintenance and Inspection

Periodically perform the following checks to ensure stable operation of the Proximity Sensor over a long period of time.

1. Check for mounting position, dislocation, looseness, or distortion of the Proximity Sensor and sensing objects.
2. Check for loose wiring and connections, improper contacts, and line breakage.
3. Check for attachment or accumulation of metal powder or dust.
4. Check for abnormal temperature conditions and other environmental conditions.
5. Check for proper lighting of indicators (for models with a set indicator.) Never disassemble or repair the Sensor.

Mounting

The Proximity Sensor must not be subjected to excessive shock with a hammer when it is installed, otherwise the Proximity Sensor may be damaged or lose its water-resistivity.

Operating Environment

Be sure to use the Proximity Sensor within its operating ambient temperature range and do not use the Proximity Sensor outdoors so that its reliability and life expectancy can be maintained. Although the Proximity Sensor is water resistive, a cover to protect the Proximity Sensor from water or water-soluble machining oil is recommended so that its reliability and life expectancy can be maintained. Do not use the Proximity Sensor in an environment with chemical gas (e.g., strong alkaline or acid gasses including nitric, chromic and concentrated sulfuric acid gases)

SUITABILITY FOR USE

OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer’s application or use of the products. Take all necessary steps to determine the suitability of the product for the systems, machines, and equipment with which it will be used. Know and observe all prohibitions of use applicable to this product.

NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.

Omron E2A-M12KS04-WP-B1-2M