Analog Output Module | 1794-OE4 | Allen Bradley

$223.00

The Flex IO product line includes the Allen-Bradley 1794-OE4 analog output module. This module is a Distributed I/O node component that is compatible with Flex I/O communication adapters like as Ethernet, ControlNet, Profibus, and Remote I/O. This module has four (4) user-configurable output channels that may produce 0 to 20mA, 4 to 20mA, +/- 10VDC, and 0 to 10 VDC voltage signals.

Brand:       Allen Bradley

Model:       1794-OE4

Type:         Analog Output Module

The Flex IO product line includes the Allen-Bradley 1794-OE4 analog output module. This module is a Distributed I/O node component that is compatible with Flex I/O communication adapters like as Ethernet, ControlNet, Profibus, and Remote I/O. This module has four (4) user-configurable output channels that may produce 0 to 20mA, 4 to 20mA, +/- 10VDC, and 0 to 10 VDC voltage signals.

Implement automated and manual control of modulating devices such as Variable Frequency Drives (VFD), modulating control valves, converters, transducers, dampers, louvers, and other Final Control Elements (FCE) using this module. This module’s output channels offer a non-isolated, single-ended setup.

The 1794-OE4 has a resolution of 12 bits plus sign, with voltage increments and decrements of 2.56mV/cnt and current increases and decrements of 5.13A/cnt. The analog data from the module is saved to a registered formatted as left justified, 16-bit 2’s complement. The pulse width modulation approach is used to transform this register.

The Allen-Bradley 1794-OE4 is compatible with the Flex I/O communication adapters 1794-ACN15, 1794-ACNR15, 1794-AND, 1794-AENT, and 1794-AENTR. It may also be utilized with a MicroLogix small controller via connection adapters 1794-ASB and 1794-APB.

The Allen-Bradley 1794-OE4 is backwards compatible with the 1794-TB2, 1794-TB3, 1794-TB3S, 1794-TB3T, 1794-TB3TS, and 1794-TBN terminal bases. To install the module, just one (1) terminal base is necessary. Terminal bases serve as DIN rail attachment points as well as termination points for output signal cabling. The necessary key switch position for the Allen-Bradley 1794-OE4 is 4.

The Allen-Bradley 1794-OE4 module measures 94.0 x 94.0 x 53.3 mm (3.7 x 3.7 x 2.1 in). It has one (1) green/red power/status indicator and one (1) built-in group diagnostic LED.

The Allen-Bradley 1794-OE4 has a green status indicator for monitoring module functioning. The module has an output resolution of 12 bit + sign, a voltage resolution of 2.56 mV/cnt, and a current output resolution of 5.13 A/cnt.

It employs pulse width modulation as its output conversion method. An output conversion rate of 1.024 milliseconds for all channels.

The Allen-Bradley 1794-OE4 module has a current input accuracy of 0.425% full scale at 25 degrees Celsius. The temperature current input accuracy drift of 0.0069% full scale per degree Celsius. It boasts a voltage input accuracy of 0.133% full scale at 25 degrees Celsius and a temperature drift of 0.0045% full scale per degree Celsius. The output signal ranges of the module include 4 to 20 mA, 0 to 20 mA, +/-10 Volts, and 0 to 10 Volts. At 24 Volts DC, the 1794-OE4 has an external DC supply current of 70 mA. It features a voltage or input terminal reaction time of 24 milliseconds and a bus rating of 20 mA. This module has a step reaction time of 24 milliseconds (voltage output) which is up to 63% of the full-scale setting.

It has a maximum current load of 3 mA on the voltage output and a resistive load of 15 to 750 on the output current. The maximum power dissipation of this module is 4.5W at 31.2 Volts DC, while the maximum thermal dissipation is 15.3 BTU/hour at the same voltage. It can also operate at temperatures ranging from 0 to 55 degrees Celsius.

Specification Detail
Wire Size Determined by installed terminal base
External DC Supply, nom: 24V DC
Indicators 1 green/red power/status indicator
Terminal Base 1794-TB2, -TB3, -TB3S, -TB3T, -TB3TS, and -TBN
Conversion Rate 1.024ms maximum all channels
Output Type 0 to 20 mA; 4 to 20 mA; +/- 10VDC; 0 to 10 VDC
No. of Inputs Four (4) Single Ended
Product Description: Flex IO High Density Analog Output Module
External DC Supply Range 10.0…31.2V DC (includes 5% AC ripple)
Mounting DIN Rail
Operating Temperature 0 to 55 C (32 to 131 F)
Storage Temperature –40…85 °C (–40…185 °F)
Resolution 12 bits plus sign Voltage: 2.56mV/cnt Current: 5.13µA/cnt
Data Format left justified, 16 bit 2s complement
Conversion Type Pulse Width modulation
Vibration 5g @ 10 to 500 Hz
Outputs 4 Single-ended
Output Current Terminal 4 to 20 mA
Output Voltage Terminal +/- 10 Volts
Current Load on Voltage Output 3 mA maximum
Flexbus Current 20 mA
Power Dissipation 4.5 W at 31.2 Volts DC maximum
Thermal Dissipation 13.6 BTU/hour at 31.2 Volts DC maximum
UPC 10612598137876
UNSPSC 32151602