Servo Drive | LXM32AD30N4 | Schneider
Original price was: $1,800.00.$1,490.00Current price is: $1,490.00.
Schneider is the most important and widely used brand in the field of automation and the electrical industry. Providing the best drive, and motor with the combination that can provide the best response according to the need of the application and deliver the best.
Model: LXM32AD30N4
Type: Motion Servo Drive
Introduction:
Schneider is the most important and widely used brand in the field of automation and the electrical industry. Providing the best drive, and motor with the combination that can provide the best response according to the need of the application and deliver the best.
Follow the guidelines below for temperature and protection index while installing the servo drive in the enclosure: Don’t install the servo drive close to heat sources and give the servo drive enough cooling Avoid heating the servo drive’s cooling air with hot air currents from other machinery and parts, such as those from an external brake resistor.
Fit ventilation grilles to the enclosure, check that ventilation is adequate, or install a forced ventilation device with a filter to guarantee proper air circulation in the servo drive.
BCH servo motors use Three-phase synchronous motors.
Two different high-quality encoder ranges are included with BCH motors.
The Lexium 23M may be utilized for applications requiring high performance for material working, such as machine tools, because the Lexium 23C Series is compatible with 10,000 Increment encoders and the Lexium 23M is compatible with 20-bit encoders.
- Handling of materials.
- Machines for assembly and inspection.
- Packaging and printing.
- Wrapping and Unwrapping.
- Tools for machines.
| Specification | Detail |
| Range of Product | Lexium 32 |
| Product or Component Type | Motion servo drive |
| Device Short Name | LXM32A |
| Format of the Drive | Book |
| Network Number of Phases | Three-phase |
| [Us] Rated Supply Voltage | 200…240 V – 15…10 % 380…480 V – 15…10 % |
| Supply Voltage Limits | 170…264 V 323…528 V |
| Supply Frequency | 50/60 Hz – 5…5 % |
| Network Frequency | 47.5…63 Hz |
| EMC Filter | Integrated |
| Continuous Output Current | 10 A at 8 kHz |
| Output Current 3s Peak | 30 A for 5 s |
| Maximum Continuous Power | 5600 W at 400 V2600 W at 230 V |
| Nominal Power | 2 kW at 230 V 8 kHz 3 kW at 400 V 8 kHz |
| Line Current | 11.6 A 74 % at 380 V, with external line choke of 1 mH 9.6 A 85 % at 480 V, with external line choke of 1 mH 7 A 152 % at 480 V, without line choke 9.8 A 146 % at 380 V, without line choke |
| Complementary | |
| Switching Frequency | 8 kHz |
| Overvoltage Category | III |
| Maximum Leakage Current | 30 mA |
| Output Voltage | <= power supply voltage |
| Electrical Isolation | Between power and control |
| Type of Cable | Single-strand IEC cable (temperature: 50 °C) copper 90 °C XLPE/EPR |
| Electrical Connection | Terminal, clamping capacity: 3 mm², AWG 12 (CN8) Terminal, clamping capacity: 5 mm², AWG 10 (CN1) Terminal, clamping capacity: 5 mm², AWG 10 (CN10) |
| Tightening Torque | CN8: 0.5 N.m CN1: 0.7 N.m CN10: 0.7 N.m |
| Discrete Input Number | 1 capture discrete input(s) 2 safety discrete input(s) 4 logic discrete input(s) |
| Discrete Input Type | Capture (CAP terminals) Logic (DI terminal) Safety (compliment of STO_A, compliment of STO_B terminals) |
| Sampling Duration | DI: 0.25 ms discrete |
| Discrete Input Voltage | 24 V DC for capture 24 V DC for logic 24 V DC for safety |
| Discrete Input Logic | Positive (compliment of STO_A, compliment of STO_B) at State 0: < 5 V at State 1: > 15 V conforming to EN/IEC 61131-2 type 1 Positive (DI) at State 0: > 19 V at State 1: < 9 V conforming to EN/IEC 61131-2 type 1 Positive or negative (DI) at State 0: < 5 V at State 1: > 15 V conforming to EN/IEC 61131-2 type 1 |
| Response Time | <= 5 ms compliment of STO_A, compliment of STO_B |
| Discrete Output Number | 2 |
| Discrete Output Type | Logic output(s) (DO)24 V DC |
| Discrete Output Voltage | <= 30 V DC |
| Discrete Output Logic | Positive or negative (DO) conforming to EN/IEC 61131-2 |
| Contact Bounce Time | <= 1 ms for compliment of STO_A, compliment of STO_B 2 µsfor CAP Braking current 50 mA 0.25 µs…1.5 ms for DI |
| Response Time on Output 2 | 50 µs (DO) for discrete output(s) |
| Control Signal Type | Servo motor encoder feedback |
| Protection Type | Against reverse polarity: inputs signal Against short-circuits: outputs signal |
| Safety Function | STO (safe torque off), integrated |
| Safety Level | SIL 3 conforming to EN/IEC 61508 PL = e conforming to ISO 13849-1 |
| Communication Interface | CANmotion, integrated CANopen, integrated Modbus, integrated |
| Connector Type | RJ45 (labelled CN4 or CN5) for CANmotion RJ45 (labelled CN4 or CN5) for CANopen RJ45 (labelled CN7) for Modbus |
| Method of Access | Slave |
| Commissioning Port | 2-wire RS485 multidrop for Modbus |
| Transmission Rate | 1 Mbps for bus length of 4 m for CANopen, CANmotion 125 kbps for bus length of 500 m for CANopen, CANmotion 250 kbps for bus length of 250 m for CANopen, CANmotion 50 kbps for bus length of 1000 m forCANopen, CANmotion 500 kbps for bus length of 100 m for CANopen, CANmotion 9600, 19200, 38400 bps for bus length of 40 m for Modbus |
| Number of Addresses | 1…127 for CANopen, CANmotion 1…247 for Modbus |
| Communication Service | 1 receive SDO for CANmotion 1 transmit SDO for CANmotion 2 PDOs conforming to DSP 402 for CANmotion 2 SDOs receive for CANopen 2 SDOs send for CANopen 4 configurable mapping PDOs for CANopen CANopen device profile drives and motion control for CANopen, CANmotion Display of faults on integrated display terminal for Modbus Emergency for CANopen, CANmotion Event-triggered, time-triggered, remotely requested,sync (cyclic), sync(acyclic) for CANopen Node guarding, heartbeat for CANopen Position control mode for CANmotion Position control, speed profile, torque profile and homing mode for CANopen Sync for CANmotion |
| Status LED | 1 LED (red) servo drive voltage 1 LED error 1 LED RUN 2 |
| Signalling Function | Display of faults 7 segments |
| Marking | CE |
| Operating Position | Vertical +/- 10 degree |
| Product Compatibility | Servo motor BMH (100 mm, 3 motor stacks) Servo motor BMH (140 mm, 1 motor stacks) Servo motor BSH (100 mm, 3 motor stacks) Servo motor BSH (100 mm, 4 motor stacks) Servo motor BSH (140 mm, 1 motor stacks) |
| Width | 68 mm |
| Height | 270 mm |
| Depth | 237 mm |
| Net Weight | 2.6 kg |
