Retro-Reflective | WL9M4G-3P2232 | SICK
$210.00
SICK Retro-Reflective – WL9M4G-3P2232
Brand: SICK
Model: WL9M4G-3P2232
Type: Retro-Reflective
SICK Retro-Reflective – WL9M4G-3P2232
| Specification | Detail |
| Functional Principle | Photoelectric retro-reflective sensor |
| Functional Principle Detail | Auto-collimation |
| Dimensions (W x H x D) | 12.2 mm x 49.8 mm x 23.6 mm |
| Housing Design (Light Emission) | Rectangular |
| Mounting Hole | M4 |
| Sensing Range max. | 0 m … 5 m 1) |
| Sensing Range | 0 m … 3 m 1) |
| Type of Light | Visible red light |
| Light Source | PinPoint LED 2) |
| Light Spot Size (distance) | Ø 45 mm (1.5 m) |
| Wavelength | 650 nm |
| Adjustment | Single teach-in button |
| Auto-Adapt | Yes |
| Special Feature | Detecting transparent objects |
| Special Applications | Detecting transparent objects |
1) Reflector PL80A.
2) Average service life: 100,000 h at TU = +25 °C.
| Supply Voltage | 10 V DC … 30 V DC 1) |
| Ripple | < 5 Vpp 2) |
| Current Consumption | 20 mA 3) |
| Switching Output | PNP 4) |
| Output Function | Complementary |
| Switching Mode | Light/dark switching 4) |
| Output Current Imax. | ≤ 100 mA 5) |
| Response Time | < 0.5 ms 6) |
| Switching Frequency | 1,000 Hz 7) |
| Connection Type | Male connector M8, 4-pin |
| Circuit Protection | A 8) B 9) C 10) |
| Protection Class | III |
| Weight | 13 g |
| Polarization Filter | Yes |
| Housing Material | Plastic, VISTAL® |
| Optics Material | Plastic, PMMA |
| Enclosure Rating | IP66 IP67 IP69K |
| Special Feature | Detecting transparent objects |
| Ambient Operating Temperature | –40 °C … +60 °C |
| Ambient Temperature Storage | –40 °C … +75 °C |
| UL File No. | NRKH.E181493 |
1) Limit values when operated in a short-circuit protected network: max. 8 A.
2) May not exceed or fall below Uvtolerances.
3) Without load.
4) Q = light switching.
5) At and above Tu 50 °C, a max. load current of Imax. = 50 mA is permitted.
6) Signal transit time with resistive load.
7) With light/dark ratio 1:1.
8) A = VSconnections reverse-polarity protected.
9) B = inputs and output reverse-polarity protected.
10) C = interference suppression.
| eCl@ss 5.0 | 27270902 |
| eCl@ss 5.1.4 | 27270902 |
| eCl@ss 6.0 | 27270902 |
| eCl@ss 6.2 | 27270902 |
| eCl@ss 7.0 | 27270902 |
| eCl@ss 8.0 | 27270902 |
| eCl@ss 8.1 | 27270902 |
| eCl@ss 9.0 | 27270902 |
| eCl@ss 10.0 | 27270902 |
| eCl@ss 11.0 | 27270902 |
| eCl@ss 12.0 | 27270902 |
| ETIM 5.0 | EC002717 |
| ETIM 6.0 | EC002717 |
| ETIM 7.0 | EC002717 |
| ETIM 8.0 | EC002717 |
| UNSPSC 16.0901 | 39121528 |
