Servo Motor | TL-A230P-BJ32AA | Allen Bradley

Brand:  Allen Bradley

Model:  TL-A230P-BJ32AA

Type:    Low-inertia Servo Motor

Introduction:

Allen Bradley TL-A230P-BJ32AA a low-inertia servo motor from the Allen-Bradley TLY and TL series is the Allen Bradley TL-A230P-BJ32AA. It has a 3-inch stack of strong magnets inside of it that allow it to function smoothly with little inertia. The 230 Volt AC low-inertia servo motor, model number Allen Bradley TL-A230P-BJ32AA, can operate at speeds of up to 5000 RPM.

This motor is built using a high-energy neodymium-iron-boron permanent magnet rotor that is appropriate for improved motor performance, and it has a high torque density performance ratio in a relatively small size. The working voltage of the Allen Bradley TL-A230P-BJ32AA is 230 Volts AC.

It has a kilowatt output power rating, a continuous current rating of 5.5 Amps, and a peak rating of 15.5 Amps. It has a stall torque rating of 1.3 N-m, with a peak torque of 3.05 N-m, and a base motor speed of 5000 RPM at 230 Volts AC input.

The TL-A230P-BJ32AA has a winding resistance of 1.71 to 2.09 Ohms at 30 degrees Celsius, a winding inductance of 8.4 milli-Henry, and a thermal time constant of 15 minutes at 40 degrees Celsius.

The Allen Bradley TL-A230P-BJ32AA motor, like all others in the TL series, has a bearing fatigue life of up to 20,000 hours and can run at 5000 RPM with an 18-kilogram radial load. It has a battery backup, a 17-bit multi-turn high-resolution encoder, serial communication ability, an integrated memory that offers absolute position feedback, and a serial COM interface that allows for the storing and transfer of motor identification.

The Allen Bradley TL-A230P-BJ32AA includes a 1-meter connecting cable with a rectangular connection. A 25-millimeter frame size that is rated in millimeters. It also has a 30-millimeter magnetic stack length. It supports metric flange installation and features an IP65-rated dust and water-resistant enclosure with a shaft seal. The TL-A230P-BJ32AA has an operating temperature range of 0 to 40 degrees Celsius. A non-condensing relative humidity range of 20 to 85%, and a storage temperature range of -10 to 85 degrees Celsius.